Whyte Series F - WFRXVH-G2 (Wideband Fibre Receiver VH)
WFRXVHT-G1 and WFRXVH-G2 are Wideband Optical Receivers from the Whyte Series F Range. When used with a Whyte Fibre Optic Transmitter, signal degradation between the RF source (the LNB) and the Wideband Optical Receiver is a mere 0.2dB MER. A Tri-colour LED indicator per laser wavelength indicates the optical input status of the receiver.
The Whyte Series F wideband receivers connect directly to all Whyte Series D dSCR Multiswitches and Series 5WB Amplifiers, Taps and Splitters providing a convenient, compact, and robust solution. These wideband fibre receivers are line powered via the SAT outputs.
The WFRXVHT-G1 and WFRXVH-G2 receivers can be linked together (loop-through) enabling two satellites (Wideband) and terrestrial to be received over one fibre using five laser wavelengths, or one Quattro SAT + TERR (also over a single fibre). This configuration requires two Whyte Fibre Optic Transmitters that are also interconnected via the Optical Loop-through.
- 4 Year Warranty
- Optical Input LED indicators
- Powered via the SAT Outputs
- Ultra Low MER Degradation <0.2dB
- SC APC Fibre Input / Output connector
- WB SAT V, H & TERR Output (WFRXVHT-G1)
- WB SAT V & H (WFRXVH-G2)
Specifications
| Optical Inou/Outputs | SC APC |
| RF Outputs | 2 (V & H Wideband SAT) |
| Optical Wavelengths | 1490nm – 1510nm |
| Frequency Range | 290 – 2340MHz |
| Optical Input Level | 0 ~ -14dBm |
| Optical Input Levels LED | Low, Nominal and High |
| RF Output Level TERR | – |
| RF Output Level Wideband SAT | 83dBμV ±3dB |
| RF Return Loss | >10dB |
| RF Output Connector Type | 75Ω F Type (Female) |
| Power Indicator | Green LED |
| DC Supply | Via SAT Outputs (18V DC) |
| Power Consumption Max @ 18V DC | 160mA |
| Dimensions L x W x H (mm) | 140 x 60 x 38 |
| Weight | 236g |
