Whyte Series F - WFRXVH-G2 (Wideband Fibre Receiver VH)

WFRXVHT-G1 and WFRXVH-G2 are Wideband Optical Receivers from the Whyte Series F Range. When used with a Whyte Fibre Optic Transmitter, signal degradation between the RF source (the LNB) and the Wideband Optical Receiver is a mere 0.2dB MER. A Tri-colour LED indicator per laser wavelength indicates the optical input status of the receiver.

The Whyte Series F wideband receivers connect directly to all Whyte Series D dSCR Multiswitches and Series 5WB Amplifiers, Taps and Splitters providing a convenient, compact, and robust solution. These wideband fibre receivers are line powered via the SAT outputs.

The WFRXVHT-G1 and WFRXVH-G2 receivers can be linked together (loop-through) enabling two satellites (Wideband) and terrestrial to be received over one fibre using five laser wavelengths, or one Quattro SAT + TERR (also over a single fibre). This configuration requires two Whyte Fibre Optic Transmitters that are also interconnected via the Optical Loop-through.


Optical Inou/Outputs SC APC
RF Outputs 2 (V & H Wideband SAT)
Optical Wavelengths 1490nm – 1510nm
Frequency Range 290 – 2340MHz
Optical Input Level 0 ~ -14dBm
Optical Input Levels LED Low, Nominal and High
RF Output Level TERR
RF Output Level Wideband SAT 83dBμV ±3dB
RF Return Loss >10dB
RF Output Connector Type 75Ω F Type (Female)
Power Indicator Green LED
DC Supply Via SAT Outputs (18V DC)
Power Consumption Max @ 18V DC 160mA
Dimensions L x W x H (mm) 140 x 60 x 38
Weight 236g

Whyte Authorised Stockist

Follow Us