Whyte Fibre Optic Splice Protectors - WSP-100-45 | WSP-100-60
These products are made up of cross-linked polyolefin heat-shrinkable tubes, hot melt tubes and a stainless-steel needle. It is specifically designed for the protection of fibre optical fusion splices. Available in either 60mm or 40mm lengths in bags of 100.
- Clear Outer Tube (shrink tube)
- Clear Inner Tube (Fibre Tube)
- Strength Member (stainless-steel pin)
Specifications
| MODE | WSP-100-45 | WSP-100-60 |
| Length of Tube (mm) | 45 | 60 |
| Inner Tube Diameter (mm) | 2.2 | 2.2 |
| After Recovery Diameter (mm) | 3 | 3 |
| Tensile Strength (Mpa) | 18 | 18 |
| Elongation at Break (%) | 700 | 700 |
| Material Density (g/m3) | 0.94 | 0.94 |
| Dielectric Strength (kV/mm) | 25 | 25 |
| Minimum Shrink Temperature (°C) | 120 | 120 |
| Outer Tube Diameter (mm) | 4.3 | 4.3 |
| Stainless Steel Needle Diameter (mm) | 1.5 | 1.5 |
| Working Temperature (°C) | -55 to 100 | -55 to 100 |
| Dielectric Constant | 2.5 | 2.5 |
| Longitudinal Change (%) | ±5 | ±5 |
| Eccentricity | 105 | 105 |
| Volume Resistance Ω | 1015 | 1015 |
| Minimum Full Recovery Temperature (°C) | 100 | 100 |
